Ghaziabad factory fire in Tronica City: blaze controlled after 3.5 hours, no casualties
Synopsis
A fire at Kumar Packers in Ghaziabad's Tronica City swept through the first floor of a three-and-a-half-storey building before dawn on 4 November, requiring six fire tenders from four stations over 3.5 hours to control. With no casualties and the cause still unknown, the incident renews spotlight on fire safety in NCR's dense industrial estates.
Key Takeaways
A major fire broke out at Kumar Packers , Plot No.
D-4, Sector B-3 , Tronica City, Loni, Ghaziabad at approximately 4:24 am on 4 November 2026 .
The blaze engulfed the entire first floor of the three-and-a-half-storey factory building, which housed car perfume production; the ground floor was used for cardboard manufacturing .
A total of six fire tenders from Loni, Vaishali, Sahibabad , and Khekra (Baghpat) stations were deployed.
The fire was fully controlled by 7:30 am after approximately three and a half hours of firefighting operations.
No injuries or casualties have been reported; the cause of the fire remains under investigation.
A major fire broke out at a packaging and manufacturing factory in the Tronica City industrial area of Loni, Ghaziabad, Uttar Pradesh, in the early hours of Wednesday, 4 November 2026, triggering a multi-station firefighting response that lasted over three hours. No injuries have been reported.
How the Fire Unfolded
The blaze was reported at Kumar Packers, situated at Plot No. D-4, Sector B-3, Tronica City. The Loni fire station received the distress call at approximately 4:24 am, and three fire tenders were immediately deployed to the site. Firefighters arriving at the scene found the flames had already engulfed the entire first floor of the three-and-a-half-storey building.
Factory workers were reportedly attempting to douse the fire using on-site extinguishing equipment before emergency services arrived. Given the intensity of the blaze, additional tenders were summoned from Vaishali, Sahibabad, and Khekra in Baghpat district.
Firefighting Operations
Crews tackled the fire simultaneously from multiple angles — laying water lines through the internal stairwell and across the roof of an adjacent factory building. After roughly three and a half hours of sustained effort involving a total of six fire tenders, the fire was fully brought under control by 7:30 am, according to officials.
Once the flames were extinguished, stored materials on the premises were cleared to eliminate any residual smouldering beneath the debris, officials said.
What Was Inside the Factory
According to fire department officials, the ground floor of the facility was used for cardboard manufacturing, while the first floor — where the fire originated and spread — was used to produce goods including car perfumes. The presence of combustible packaging materials and chemical-based products is likely to have contributed to the rapid spread of the blaze, though the exact cause has not yet been confirmed.
Investigation and Current Status
Local police were present throughout the firefighting operation. The cause of the fire remains undetermined, and an investigation is currently underway, with further details awaited from authorities. No casualties or injuries have been reported in connection with the incident.
This comes amid recurring concerns about fire safety compliance in densely packed industrial zones across the National Capital Region. The Tronica City area, home to numerous small and medium manufacturing units, has seen similar incidents in past years, raising questions about enforcement of fire safety norms in older industrial estates.
Point of View
But the fire at Kumar Packers once again exposes a familiar vulnerability: industrial estates like Tronica City pack combustible manufacturing operations — cardboard, chemical-based consumer goods — into multi-storey buildings where a first-floor fire can escalate within minutes. The fact that factory workers were attempting to fight the blaze themselves before tenders arrived suggests that emergency response protocols may not be uniformly followed. Until fire safety audits are made mandatory and publicly reported for NCR industrial zones, such incidents will remain predictable, even if the outcomes are, as here, fortunate.
NationPress
4 Nov 2026
Frequently Asked Questions
Where exactly did the Ghaziabad factory fire break out?
The fire broke out at Kumar Packers, located at Plot No. D-4, Sector B-3 in the Tronica City industrial area of Loni, Ghaziabad, Uttar Pradesh. It was reported to the Loni fire station at approximately 4:24 am on 4 November 2026.
Was anyone injured in the Ghaziabad factory fire?
No injuries or casualties have been reported in connection with the fire at Kumar Packers. All personnel appear to have evacuated safely before firefighting operations concluded.
How long did it take to control the fire at Tronica City?
It took approximately three and a half hours to fully bring the fire under control. Six fire tenders from four stations — Loni, Vaishali, Sahibabad, and Khekra (Baghpat) — worked together, and the blaze was extinguished by 7:30 am.
What was manufactured at the Kumar Packers factory?
The ground floor of the factory was used for cardboard manufacturing, while the first floor — where the fire spread — was used to produce items including car perfumes. The mix of packaging material and chemical-based goods likely contributed to the rapid spread.
What caused the fire at the Ghaziabad factory?
The exact cause of the fire has not yet been determined. An investigation is currently underway, and authorities have said further details are awaited. Local police were present at the scene during firefighting operations.
